A fire line is the underground water service that feeds a building’s fire sprinkler system. It runs from the water main to the building, separate from the line that serves sinks and toilets. When a fire line leaks, breaks or fails inspection, the sprinkler system can be put out of service until it’s fixed.
Go Direct Services repairs, replaces, installs, moves and removes fire lines from the main to the structure across the Denver metro. We’re a family-owned wet utility contractor based in Commerce City. Our crews are our own employees, we own our excavation equipment, and we’re licensed, bonded and insured.

Who we do fire line work for
Most of our fire line work is commercial. We work with:
- Property managers and HOAs with apartment buildings, townhome communities and mixed-use properties
- Commercial property owners with offices, retail, warehouses and restaurants
- General contractors and developers who need the underground fire service installed or relocated
- Fire sprinkler and plumbing contractors who need an excavation partner for the line outside the building
Signs your fire line needs repair
- Water surfacing in a lawn, parking lot or landscaped area near the fire riser or between the street and the building
- Sinking pavement or soft spots along the path of the line
- Pressure loss on the sprinkler system, or the system won’t hold pressure
- A failed test or inspection flagged by your fire protection company or fire marshal
- Unexplained water use on a fire service meter or detector check
- Old pipe, such as aging cast iron or ductile iron with corrosion, that has had repeated leaks
If water is actively coming up or the system is out of service, see our emergency fire line repair page and call us right away.
Repair or full replacement?
A single leak on an otherwise healthy line can usually be fixed by exposing the pipe and replacing the damaged section or fitting. Full replacement makes more sense when:
- The line has leaked more than once
- The pipe is badly corroded or the joints are failing along its length
- The line needs to be upsized or rerouted for a remodel, addition or new building layout
- The water provider or fire authority requires it as part of a larger project
We’ll walk the site, look at the line’s history and give you a written estimate for both options when both make sense.

How fire line repair and replacement works
- Site visit and estimate. We review the line, the site and access, then provide a free written estimate.
- Coordination. We coordinate with your fire protection contractor, the water provider and the property so everyone knows when the system will be out of service.
- Permits and locates. We confirm permit requirements and request utility locates so gas, electric and other buried lines are marked before digging.
- Excavation. We dig to the line with our own equipment, using shoring where the depth requires it.
- Repair or replace. The damaged section, fitting or full run is replaced with pipe and fittings rated for fire service.
- Testing and inspection. The line is pressure tested and flushed as the local water provider and fire authority require, and inspected before it is covered.
- Backfill and restoration. The trench is backfilled and compacted, and the surface is restored. Asphalt and concrete restoration can be included in the same scope.
Fire line installation, relocation and removal
Beyond repairs, we also handle:
- New fire line installation from the main to the building for new construction and additions
- Relocating fire lines that conflict with a new foundation, addition or site plan
- Abandoning or removing old fire services that are no longer needed
For more on our commercial underground work, see our fire line services and commercial sewer and water pages.
Need a fire line repaired or replaced? Get a free written estimate.
Warranty
Fire line work carries a written warranty of 8 to 15 years against defects, improper installation or failure of material, depending on whether the line is repaired or replaced. Your written estimate states the warranty that applies to your job.
Fire line repair FAQ
What is the difference between a fire line and a domestic water line?
A domestic line supplies the water you use for drinking, washing and flushing. A fire line supplies only the fire sprinkler system and is usually larger. Many commercial buildings have both, entering the building separately.
Will our sprinkler system be shut down during the repair?
The section being repaired has to be isolated, so the system is usually out of service for part of the job. We plan the work to keep that window as short as possible and coordinate with your fire protection company. Many fire authorities require a fire watch while a system is out of service, so check your requirements before the work date.
Who is responsible for the fire line on my property?
In most cases the property owner is responsible for the fire line on their side of the connection to the public main. Rules vary by water provider, so confirm with yours if you’re unsure where the property owner’s responsibility begins.
Do you work with our fire sprinkler contractor?
Yes. We handle the underground work outside the building and coordinate with the sprinkler contractor who maintains the riser and the system inside.
Do you handle the asphalt or concrete after the repair?
Yes. Surface restoration can be included in the same estimate, so you’re not chasing a second contractor to patch the parking lot or sidewalk.
Questions about a fire line on your property? Call us at 303-288-0039.
Sewer or Water Line Problem? We Can Be There Today.
Slow drains, backups or a soggy spot in the yard usually point to a sewer or water line problem. Call for a free estimate or book online, with same-day camera inspections across the Denver metro area.